1 KUZMA STOGI S TONEARM ( with Stabi S turntable and cartridge)
10 Mainentance: Bearing: The bearing does not require any maintenance. Cueing device: Occasionally clean the black foam tube support to increase gr
11
2 KUZMA LTD INSTRUCTION MANUAL FOR STOGI S tonearm The Stogi S tonearm is a very precisely engineered piece o
3 General Description: the tonearm is packed in one box with serial number and type of wiring marked on the outside The tonearm is of a unipivot de
4 Unpacking: The tonearm with accessories is packed in one box. Before unpacking the individual parts of the tonearm, make some space and check tha
5 Basic setup: Note: When mounting the tonearm on Stabi S turntable no armbase is required. Check the turntable instruction manual to see how t
6 The bearing base in its brass pillar on Stabi S. Fig. 2. Tube base: Carefully lift the tube base with counterweights and cable which, (for
7 Tracking force: Adjust the thicker counterweight so that the cartridge is balanced while keeping the thinner counterweight as far away from the
8 Cartridge set up: Place the cartridge on the record and observe azimuth and height of the tonearm (VTA). Height (VTA): Adjust the height of the
9 Fine VTA: The correct height of the tonearm is different for different cartridges and tracking forces. It could be above or below the theoret
Kommentare zu diesen Handbüchern