Kuzma 4Point 2008-6 Bedienungsanleitung

KUZMA 4POINT TONEARM

Fig.11 Removing vertical trough Fig.12 Removing horizontal trough Fig.13 Both troughs removed 10. Cueing devi

13. Problems 1. Cartridge jumps in the inner grooves: See if the tube can travel towards the centre of the record- check that position of the tonearm

KUZMA LTD INSTRUCTION MANUAL FOR 4POINT tonearm The 4POINT tonearm is a very precisely engineered piece of equipment

thus ensuring the cartridge platform and the cartridge itself move with very low friction and minimal vibration across the record. It is normal to fe

Technical data: Mass: 1650 gr Effective length : 280 mm ( 11 inch) Mounting distance: 21

Fig.3 Protractor for pivot to spindle distance Remove the fixing foam on the horizontal bearing assembly. Check that the bias thread i

Fig.4 Assembling the tube onto the horizontal bearing tower. Cartridge mounting: Mount the cartridge with the appropriate set of 2.5 mm screws.Wh

0-4 g +20 (3.5 mm) 6g +30 (5 mm) 8g

Fig. 8 VTA tower side-rough scale 7. Adjustment of azimuth To make azimuth adjustments, release the two screws locking the mechanism at the centre t

Fig. 9a Bias distance “X” For maximum tracking, it is advisable to set the bias by use of an appropriate test record, ie. those with tracking band